The Volantex 4 channel F4U Corsair is the perfect ready-to-fly small warbird that comes completely ready to fly with transmitter, receiver, integrated ESC, and built-in 6-axis gyro/stabiliser. This gyro system offers super stable flying and self-levelling which makes it perfect for early and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, this reduces the stabilisation and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze.

The pre-installed 10mm coreless motor with gearbox, and supplied 3.7V 360mAh LiPo battery provides ample power for general sport flying and aerobatics, it also allows for an impressive 14 minutes of flight time. The F4U comes fully assembled out of the box so is truly "Ready to Fly" and includes almost everything to get you flying. The included 2.4GHz radio just requires 4 x AA batteries to get you going and it has a range of over 100 metres.

Features:

• Perfect for low hours RC pilots

• Completely ready assembled out of the box

• Motor, ESC, servos, and receiver pre-installed

• Supplied with a 4ch 2.4GHz transmitter, 3.7V 360mAh LiPo battery, and USB charger

• Includes a switchable 6-axis gyro stabilisation system

• Constructed of tough and durable EPP foam with carbon reinforcement

• Includes a propeller saver system

Specs:

• Type: Volantex 761-8 (RTF) EPP 4CH F4U Corsair w/Gyro Stabilizer
• Experience Level: Beginners/Intermediate
• Wingspan: 400mm
• Length: 300mm
• Flying Weight: 56g
• Transmitter: 4ch 2.4GHz
• Motor: 10mm coreless
• ESC/RX/Gyro: One integrated unit
• Battery: 3.7V 360mAh LiPo
• Assembly: None required

Included:

• Volantex Volantex 761-8 (RTF) EPP 4CH F4U Corsair w/Gyro Stabilizer
• 4ch 2.4GHz transmitter
• 3.7V 360mAh LiPo battery
• USB battery charger
• Spare propeller
• Screwdriver

Required:

• 4 x AA batteries for transmitter