Overview

Features

• Capable of both precise and extreme 3D aerobatics
• Designed for compatibility with both GP and EP flight
• Genuine Oracover covering
• Bolt on two piece wing for easy transport and setup at the field
• Removable canopy for easy change lipo battery and set up radio
• Extremely lightweight laser cut all wood construction
• Durable factory painted fiberglass cowl
• Prepainted pilot figure, preinstalled in cockpit
• All hardware included

• Product Information

  Phoenix’s Sbach 342 is naturally slower but is engineered to perform equally thrilling manoeuvres! The scale-like model able to perform flat spin, knife edge and many other difficult aerobatics. The Sbach is expertly handcrafted from balsa and plywood using only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.

  Specs

  Wingspan

  1663mm (65.5 in)

  Length

  1638mm (64.5 in)

  Flying weight

  4700-5200 gr

  Wing area

  56 dm2

  Wing loading

  85g/dm2

  Wing type

  Naca airfoils

  Covering type

  Genuine ORACOVER®

  Gear type

  Aluminum Hi-grade for main gear and spring wire for tail gear (included)

  Spinner size

  Plastic 70mm (included)

  Radio

  4 channel minimum (not included)

  Servo

  6 standard hitorque servo2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)

  Recommended receiver battery

  4.8-6V / 1200-2000mAh NiMH (not included)

  Servo mount

  21mm x 42 mm

  Propeller

  suit with your engine

  Engine

  .120 / 2-stroke or .120/4-stroke glow engine (not included)

  Motor

  brushless outrunner 2000-2400 W, 450 KV (not included)

  Experience level

  Intermediate

  Plane type

  Scale Aerobatic

  RECOMMENDED MOTOR AND BATTERY SET UP

  Motor

  RIMFIRE .120 (not included)

  Lipo cell

  6-12 cells / 4000 – 5500mAh (not included)

  Esc

  80-100A (not included)

  View All Specifications