The main advantages of Power-Ion accumulators include high mechanical resistance due to their metal case. The accumulators are also characterised by long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, built-in short circuit protection is activated. There is also built-in overcharge protection which is activated if the charging voltage is higher than 5V per cell.

The Lithium-Ion cells will work in very low or very high temperatures (-10 - +60°C). Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.

Important Warnings

• Power Ion accumulators do not need to be balanced when charging.

• Charge only with Li-Ion/Li-Po battery chargers with voltage limitation to 4.2V per cell

• Do not discharge the accumulator below 2.5V per cell

• Do not discharge the accumulator beyond the maximum discharge currents listed.

• Do not charge at currents higher than those listed as maximum charging currents.

• Prevent any short circuit, short circuiting usually leads to irreversible destruction of the accumulator.

• Do not use accumulators with a damaged housing cover or insulating foil.

• Avoid contact with water and other liquids.

• Mishandling of the accumulator may cause explosion, injury, fire.