T-28 Trojan PNP 1400mm
Product Summary -
Designed to replace the aging T-6 Texan, the T-28 Trojan was a piston engine military trainer aircraft used by both the US Air Force and the US Navy. The Navy continued to use this as the primary trainer right up to the early 1980's.
Famous Models have chosen several striking colour schemes, two from the Navy and one from the Air Force; the only down side, is choosing which one to have!
The T-28 features many scale details that will look great on the deck as well as screaming down the flying strip of your club.
The newest and best ‘Electronic Worm drive' main landing gear and nose wheel are fully complemented by functioning scale doors. Batteries are easily and quickly changed due to the large removable and fully detailed canopy.
As always, ample power is provided by a lightweight and efficient brushless motor, it's turning a 3 Blade propeller and scale spinner. Loops, stall turns, 4 Point rolls are made easy with this lightweight EPO foam airframe.
The Trojan is oozing
OS GGT15 PETROL MOTOR NO INGNITION
OS GGT15 PETROL MOTOR.
The GGT15is a glo gasoline engine ignited by a glow plug but using gasoline.
so no ignition module and battrie is required.
This engine is designed for experienced fliers.
It offers broard power characteristics suitable for sport flight as well as acro flight.
Tralier Offroad Crawler 1/10
All alloy trailer -pivot trailer hitch point.
Must have crawler accessory.
B-25 PNP Green
Price: Was $394.95Now $294.95
- Material: Durable EPO
- Wing Span: 1,470mm ( 57.87in )
- Length: 1,130mm ( 44.48in )
- Flying Weight: Around 1,930g
- Servo: 9g Servo x 8
- Landing Gear : Electric Servo less Retract Landing Gear
- Motor: KV1000 Powerful Out runner Brushless Motor x 2
- ESC: 40A Brushless ESC x 2
- Propeller: 9X6.5 3 Blade Propeller With Spinner x 2
- Battery: Li-Po 11.1V 3300mAh 25C
- Radio: 6 Ch Radio Control
- CG Position: 55-60mm (From Leading Edge)
- Wing Area: 28d
- Wing Load: 69g/d
The North American B-25 Mitchell was an American twin-engined medium bomber manufactured by North American Aviation. It was used by many Allied air forces, in every theatre of World War II, as well as many other air forces after the war ended, and saw service across four decades.
The B-25 was named in honour of General Billy Mitchell, a pioneer of U.S. military aviation. The B-25 is the only American military aircraft named after a specific person. By the end of its production, nearly 10,00
Stuka JU-87 G2 1420mm
Price: Was $329.95Now $245.00
The easily recognizable inverted gull wing dive-bomber made its debut in the Luftwaffe's Condor Legion during the Spanish War.
Its potency as an accurate dive bomber made it valuable in the early stages of WW2 but later it was to prove vulnerable to the latest generation of fighter aircraft and it required heavy fighter support. The Stuka featured many innovative design features including automatic pull-up dive brakes and the infamous Jericho Trumpet siren.
FMS have accurately modeled the G variant, which was deployed as a tank buster on the ‘Eastern Front'. The 37mm cannons were located in under the wing gun pods and they proved to be very successful even though they were limited to 6 rounds per cannon.
This highly detailed replica is also a pleasure to fly and it's a cinch to land too. The powerful brushless motor drives a 3 blade propeller making for a very powerful and efficient aircraft. Just remember to keep an eye out for any Spitfires!
Stuka JU87-G2 Features:
E-Flite UMX Habu 180 DF RC Jet, BNF Basic
Price: Was $164.95Now $139.95
The E-flite® UMX™ Habu DF is a high-performance jet experience you can enjoy from the convenience of a backyard. Modeled after the popular ParkZone® EDF sport jet, you get a sharp looking hotrod that's been custom engineered to deliver impressive maneuverability at a variety of speeds and the agility to hold almost any attitude. At its core is breakthrough ultra-micro electric ducted fan technology featuring inlet and exhaust ducting expressly engineered to harness the full potential of the high-speed 28mm Delta-V® 180m brushless EDF system. The best part of all is the surprisingly rock-solid handling and control feel provided by its AS3X® system. No matter how you choose to fly, AS3X technology provides smooth, natural feeling control while battling many of the bumps and wiggles caused by wind and turbulence. So if it's goose bumps you want, this jet will help you get them fast.
Using modern manufacturing techniques and sophisticated components, four-channel air control is at your
SKYCRUISE 2400 EPO FPV PLATFORM RTF NO CHGARGER
With the modular design of the Skycruise 2400 the main wings and tail are easy to asemble and disassemble attached with plastic screws. (no glue required)
Optional flaps with servo positions cut
Constructed from composite material to reduce flying weight and increase strength
To protect the aircraft from damage there is a scuff wheel underneath aswell as a stainless steel skid pad and also chafing pieces on the wings
Detachable nose hatch for mounting action cameras and FPV
The motor has excellent heat dissipation which ensures efficiency and long life.
Removable canopy with plenty of space for onboard electronics
STOL PNP W/FLAPS, SLATS,PARACHUTE DROP W/SERVOS
STOL Short Take-Off and Landing 500 Class R/C Airplane
The 500 Class STOL “Pelican” is a Short Take-Off and Landing airplane. It uses leading and trailing edge flaps and also features a drop bay. The STOL is lifted with a powerful brushless motor and Li-Po battery giving good performance and control with high ability.
Leading and trailing edge flaps.
Servo operated drop bay with parachute umping figure release your cargo at the flick of a switch
Large diameter tyres for rough ground or long grass landings
Yellow EPO fuselage for toughness, strength and durability – made with ultra-strong epoflex foam
Hi-performance Brushless motor and ESC with a Li-Po battery gives maximum power and flight time
Wing Area: 23.6dm^2
Wing Loading: 61g/dm^2
Brushless Motor: ST3511-760KV
ESC: 30A Brushless
Servos: 9g x 7
RC System: EEFLY-BII 6CH 2.
RIPMAX DAGGER EP ARTF 850mmWS, 3CH
Developed with one thing in mind... performance! Small enough to transport simply, this one-piece delta is the most exciting thing we’ve flown this year.
The wings, fuselage and fins are supplied pre-covered in this dramatic film scheme, ready for rapid final assembly before installation of your choice of brushless motor and three channel R/C. Designed for mini servos (we used Ripmax SD200s on the prototypes) and a choice of 3 or 4S Li-Pos, the Dagger has a fantastic turn of speed, yet is almost impossible to stall. A vice-free performer, the Dagger is simple to launch with handy finger grips on the underside.
• CNC balsa construction
• Attractive colour scheme
• Metal backplate spinner
• Amazing roll rate
Wingspan: 850mm (34.5")
Length: 710mm (28.0")
Weight: 920g (32.5oz)
Radio System: 3 Channel with Delta Mixing (Req.)
Electric Motor: Outrunner Brushless (Rec.)
LiPo: 3-4S 2200mAh (Req.)
Speed Controller: 40-50A (Req.)
E-Flite UMX B-17G Flying Fortress RC Plane, BNF
coming soon , LAYBY NOW
Conceived in the mid-1930s by Boeing Aircraft Company, the B-17 aircraft not only demonstrated capabilities beyond expectations over Europe, around the globe it went on to deliver military service well into the 1960s. She was dubbed the "Flying Fortress" for her incredible defensive firepower and is credited with downing 23 enemy aircraft per 1,000 raids that devastated European targets in daylight raids with 640,036 tons of bombs. Now known as the most famous bomber of WWII, heroic crew members loved the B-17 for her ability to withstand extensive combat damage and still return home safely.
The E-flite® UMX™ B-17G Flying Fortress model is an ultra micro marvel. Not only is it the first ultra micro RC model of the famous WWII bomber, it includes innovative AS3X® technology that makes flying more fun. Built into the Spektrum™ DSMX® receiver, AS3X technology has been specially tuned to combat the effects of
Big Quad w/flip function & camera 4ch
Up and down, forward and back, left and right side fly, steering, hover, a flip, can also be rolling in four directions, can upgrade the camera function and WIFI control
• Battery for helicopter:7.4V 850mAh
• Charging time:About 150 minutes • Flying Time:More than 6 minutes
• Control distance:More than 30 meters
• Controller battery:4*AA (not included)
• Protection Function:Battery protection board
Premium Edition RC Log Loader with 2.4Ghz Radio Sy
The Hobby Engine Premium Edition Radio Control Log Loader offers hard hat time with Hobby Engines' superb range of highly detailed, rugged construction vehicles. This scale model features ten functions that can all be operated from the transmitter and works just like the real thing!
The log loader is fitted with an open/close claw and includes 3 logs for scale realism. The loader's arm extends and rotates allowing you to carry your load and release it at your destination.
The Premium Edition models by Hobby Engine feature upgraded metal gearing and enough power to work with real loads!
Hobby Engine Log Loader Features:
•10-function 2.4GHz control system
•Lights, forward/reverse, rear turning action, realistic lift and tilt
•High grade gear box
•Working head light & rear light
•Enough power to work with real loads!
•Extends to nearly 60cm
•4.8v 800mah Ni-Cd battery included
•AC Charger Included
Premium Edition RC Crane Grabber with 2.4Ghz Radio
The Hobby Engine Crane Grabber is absolutely authentic and fully functional.
With its airbrushed paint finish and realistic professional printing, just like the real machine, this kit takes scale modelling to the highest level. Powerful electric motors cope with impenetrable terrain, turn the machine on the spot, lower and raise the grabber arm.
The interference-free 2.4 GHz radio control gives proportional control of all functions of the grabber.
The Premium Edition models by Hobby Engine feature upgraded metal gearing and enough power to work with real rocks and sand!
Premium Edition RC Crane Grabber Features:
•2.4 GHz RC system
•Tracks individually steerable
•Radio controlled functions: drive forwards/backwards, turn left/right, turn on the spot, raise/lower grabber arm, open/close grabber
•7.2v 800mah Ni-Cd battery included
•AC Charger Included
Phone: (07) 3823 3033
Fax: (07) 3823 3033
Email: [email protected]